nerd // electrical engineer // retro hardware collector // cinephile // audiophile // "i am an engineer, troubled by aesthetics." wim crouwel
Sunday, March 26, 2023
Monday, March 20, 2023
EDID resolution problem in Linux and Phoenix EDID Designer.
When i hooked up the Linux PC to old CRT monitor with BNC to VGA cable, the OS can't get edid data from monitor and cannot listed modes of monitor supported properly. For resolving that issue i find these useful links.
Thursday, March 16, 2023
Changing boot up sequence BIOS/POST logo for MSI & AMI BIOS.
Thanks to NexxCat@reddit.
Acquire "AMI ChangeLogo Tool v5.0.0.2" from here.
Acquire the BIOS to modify. I used E7B89AMS.1A3.
Extract and rename the BIOS to E7B89AMS.ROM
Run ChangeLogo_v5.exe
Click "Load Image"
Select E7B89AMS.ROM
Click "Browse" below "Save Logo"
Select your new boot logo, It *must* be JPEG no bigger than 800x600.
Click "Replace Logo"
Under "Available Images" select MyOemLogo1
Repeat steps 7, 8 & 9
Click "Save Image As" and provide the original filename for your modded BIOS. In this case, I used E7B89AMS.1A3
Flash the modded BIOS as you usually would.
Acquire the BIOS to modify. I used E7B89AMS.1A3.
Extract and rename the BIOS to E7B89AMS.ROM
Run ChangeLogo_v5.exe
Click "Load Image"
Select E7B89AMS.ROM
Click "Browse" below "Save Logo"
Select your new boot logo, It *must* be JPEG no bigger than 800x600.
Click "Replace Logo"
Under "Available Images" select MyOemLogo1
Repeat steps 7, 8 & 9
Click "Save Image As" and provide the original filename for your modded BIOS. In this case, I used E7B89AMS.1A3
Flash the modded BIOS as you usually would.
Subscribe to:
Posts (Atom)